Differences between IC-402 and IC-402S?
The IC-402S is identical to ICOMS award-winning IC-M402, but the IC-M402S does not accept an optional remote control mic __ the "S" version is ideal for boaters who dont need a second helm radio station or the expense of the optional mic connection port.
Large 2-digit Ch with scrolling channel names
Look at the size of the LCD with large letters and numbers! The large, easy to see display has 27×43mm (11⁄16×15⁄8 in.) dimensions, so channel indications are maximized. 10-character channel names and all settings are displayed at the same time.
Force 5 Audio™
The front facing speaker offers loud crisp reception that is easy to hear, even over engine or wind noise.
Built-in DSC capability that meets RTCM SC101
The DSC watch function monitors Ch 70, while receiving another channel. It allows you to send a formatted distress message in an emergency. The position request function indicates a callers position. Up to 30 DSC IDs are memorized.
Submersible (1m depth for 30 minutes)
After each outing, spray the IC-M402/S with fresh water to remove any salt. By doing so, you will remove any mineral build-up, and extend the life of the raio. (Equivalent to JIS Grade 7; except cables)
Optional COMMANDMIC® (IC-M402 only)
Our COMMANDMIC® makes it convenient for using the IC-M402 from a separate cabin or tower. It allows you to remotely control all functions of the IC-M402 (except DSC operation). It offers its own large, easy to read LCD, is easy to hear and is also waterproof!
- One touch access to Scan button on the front panel
- Impressive speaker audio
- Position indication in seconds accuracy
- NMEA input ERMC, GGA, GNS and GLL sentences
- Position report and position request functions
- Dualwatch and tri-watch functions for monitoring channel 16 and/or another call channel, while receiving on another channel
- Supplied remote function microphone for convenient channel and power selection
- NOAA weather channels with alert function
- Adjustable LCD backlighting and key illumination in 4 steps for nighttime operation
- Simple and easy tag scanning system
- Available in black or white
|Frequency coverage (Unit; MHz)||: Tx 156.025 - 157.425|
Rx 156.050 - 163.275
|Usable channels||: All International, U.S.A.* and Canadian* channels; plus 10 weather* channels (* U.S.A. version only)|
|Type of emission||: 16K0G3E (FM), 16K0G2B (DSC)|
|Power supply requirement||: 13.8 V DC ±15% (neg. ground)|
|Current drain (at 13.8 V DC)|
|: Tx at 25 W|
RX (Max. audio output)
|Operating temperature range||: -20°C to +60°C; -4°F to +140°F|
|Antenna connector||: SO-239 (50 ohm)|
|Dimensions (proj. not incl.)||: 153(W) × 67(H) × 141.6(D) mm|
6 1/32(W)× 2 5/8(H)× 5 9/16(D)in
|Weight||: 900g; 2lb|
|NMEA formats||: RMC, GGA, GNS, GLL|
|Output power (at 13.8 V DC)||: High 25 W |
Low 1 W
|Modulation system;||: Variable reactance freq. modulation|
|Adjacent channel power ||: 70 dB|
|Spurious emissions||: Less than -70 dBc|
|Residual modulation||: More than 40dB|
|Receive system||: Double conversion superheterodyne|
|Intermediate freq.||: 1st 21.7MHz|
|Sensitivity (at 12 dB SINAD)||: 0.22 µV typ.|
|Squelch sensitivity||: 0.22 µV|
|Adj. channel selectivity (wide/narrow)||: 70 dB |
|Intermodulation rejection||: 70 dB |
|Spurious response rejection||: 70 dB|
|Audio output power||: 4.5 W typ. at 10% distortion with a 4 ohm load|
- Hand microphone, HM-141B/W
- DC power cable
- Mounting bracket kit
All stated specifications are subject to change without notice or obligation.
- MB-69 FLUSH MOUNT KIT
For flush-mounting the IC-M402 to a flat surface such as an instrument control panel.
- MB-92 DUST COVER
Protects the IC-M402 from dust and strong sunlight when the radio is not in use.
- HM-141B/W HAND MICROPHONE
White and black are available. Same as supplied.
- HM-157B/W REMOTE-CONTROL MICROPHONE (IC-M402 only)
Up to 21m (70ft) of freedom from the IC-M402 with two OPC-999 EXTENSION CABLES. Allows you to control all functions of the IC-M402 (except DSC operation).
Size (W×H×D): 63.5 × 125.0 × 31.4mm; 2 1/2 × 4 29/32 × 1 1/4 in.
Weight (approx.;except cables): 150g ; 5.3oz
Supplied accessories :
Please note that the HM-127B/W is not compatible with the HM-134B.
- 6m (20ft) of cable
- Mic. hanger
- Mounting base for cable connector
-->COMMANDMIC is a trademark of Icom Inc.
- OPC-999 EXTENSION CABLE FOR HM-127B/W (IC-M402 only)
6.1m (20ft) of extension cable for additional lengthening for use with COMMANDMIC®.